SPECIFICATIONS

Product features:
1. Arrow pointer, precise measurement: wide scale interval, clear imprint on large number dial, convenient reading
2. Convenient measurement: Move the button to adjust the humidity, brightness, and pH value as needed, simple and convenient
3. High precision of double needle detection: Double needle design, fast detection speed, accurate analysis of soil moisture, pH value, etc
4.3 Integrated multifunctional, direct use without battery, high cost performance: can detect humidity, pH, and light
5. Application scenarios: potted planting, orchard planting, etc
Product parameters:
Product Name: Three in One Soil Tester
Product specifications: Round head
Product color: Green
Product function: Measure illuminance/pH (acidity/alkalinity)/humidity
Probe length: 197mm (cannot be directly placed in water to measure water, as it may damage the electrodes!)
To use the probe, it needs to be inserted into the soil at a depth of 2/3 (about 15CM) for accurate measurement!

Usage: When measuring soil pH and humidity, first insert the probe as deep as possible into the soil (above 15CM)
(Please note: cannot be directly inserted into water for testing, not suitable for orchid humus soil, cement, etc.)
Soil moisture measurement:
Move the button on the pen to MOIST. MOIST is the moisture key, corresponding to MOIST, DRY is dry, and WET is wet on the table. Values 1-3 (red part) indicate the need for watering, and 4-7 (green part) are appropriate. Please adjust the watering time according to the plant variety. 8-10 (blue part) indicates that it is too wet
Soil pH measurement:
Move the button on the pen to PH, where PH is the pH key and corresponds to the values of 8-3.5 on the table. ALKALINE is alkaline, ACDIC is acidic, and value 7 is basically neutral. The smaller the number, the higher the acidity. Please adjust the soil pH according to the variety of plants
Measurement of illuminance value:
The LIGHT key is the illuminance, with a measurement range of 0-2000 lumens. The larger the value, the stronger the illumination. Please decide whether shading is needed based on the variety of plants
USE:
Step 1: Switch moisture/pH/light position
Step 2: Stick the probe into the soil about 2-4 inches
Step 3: Adjust the position of the probe until the pointer on the dial swing slightly
Step 4: After 10 minutes, Note moisture/pH/light level in the dial
Step 5: Remove probe from soil and wipe clean after each use
Note:
1. Don't insert the probe agaist stone or very hard soil in case to damage the probe
2. Please wipe and clean the probe after each time using.
3. Don't leave the meter in the soil for a long time
4. Designed for testing soil, don't use it to test pure water or other liquids.
5.The indicator will not move If the soil is too dry, please water the plant first and test again later.
PH Range: 3.5-8 Ph (3.5-6.5 ACID, 7 NOR, 7-8 ALKALI)
Moisture Range: 1-10 (1-3 DRY, 4-7 NOR, 8-10 WET)
Relative Light: 0-2000 lux (0-200 LOW, 200-500LOW+, 500-1000 NOR 1000-2000 HGH)
Package includes: Soil Tester * 1